Wps - TP-Link TL-WR841N User Manual

Chapter 4
• Wireless
and you can configure them on the
•
•
•
•
•
•
•
• WAN
on the
•
•
•
•
•
• Traffic Statistics
•
•
•
•
• System Up Time
Click Refresh
4. 2.
WPS (Wi-Fi Protected Setup) can help you to quickly and securely connect to a network.
This section will guide you to add a new wireless device to your router's network quickly
via WPS.
Note:
The WPS function cannot be configured if the wireless function of the router is disabled. Please make sure the
wireless function is enabled before configuration.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
Downloaded from ManualsNet.com
- This field displays the basic information or status of the wireless function,
Wireless Radio - Indicates whether the wireless feature is enabled or not.
Name (SSID) - The SSID of the router.
Mode - The current wireless working mode in use.
Channel Width - The current wireless channel width in use.
Channel - The current wireless channel in use.
MAC Address - The physical address of the router.
WDS Status - The status of WDS connection.
- This field displays the current settings of the WAN, and you can configure them
Network > WAN page.
MAC Address - The physical address of the WAN port.
IP Address - The current WAN (Internet) IP Address. This field will be blank
or 0.0.0.0 if the IP Address is assigned dynamically and there is no Internet
connection.
Subnet Mask - The subnet mask associated with the WAN IP Address.
Default Gateway - The Gateway currently used is shown here. When you use
Dynamic IP as the Internet connection type, click
obtain new IP parameters dynamically from the ISP or release them.
DNS Server - The IP addresses of DNS (Domain Name System) server.
- The router's traffic statistics.
Received (Bytes) - Traffic in bytes received from the WAN port.
Received (Packets) - Traffic in packets received from the WAN port.
Sent (Bytes) - Traffic in bytes sent out from the WAN port.
Sent (Packets) - Traffic in packets sent out from the WAN port.
- The length of the time since the router was last powered on or reset.
to get the latest status and settings of the router.

WPS

search engine
Wireless > Wireless Settings
Renew
Configure
page.
or Release here to
16