Wireless Advanced - TP-Link TL-WR841N User Manual

Chapter 4
Done!
4. 4. 4.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to
3. Configure the advanced settings of your wireless network and click Save.
Note:
If you are not familiar with the setting items on this page, it's strongly recommended to keep the provided default
values; otherwise it may result in lower wireless network performance.
• Transmit Power
router.
• Beacon Interval
here. Beacon Interval value determines the time interval of the beacons. The beacons
are the packets sent by the router to synchronize a wireless network. The default
value is 100.
• RTS Threshold
packet is larger than the specified RTS Threshold size, the router will send RTS frames
to a particular receiving station and negotiate the sending of a data frame. The default
value is 2346.
• Fragmentation Threshold
packets will be fragmented. Setting a low value for the Fragmentation Threshold may
result in poor network performance because of excessive packets. 2346 is the default
setting and is recommended.
• DTIM Interval
Message (DTIM). A DTIM field is a countdown field informing clients of the next window
for listening to broadcast and multicast messages. When the router has buffered
broadcast or multicast messages for associated clients, it sends the next DTIM with a
Downloaded from ManualsNet.com
Now only client A and client B can access your network.

Wireless Advanced

Wireless > Wireless Advanced.
- Select High,
High is the default setting and recommended.
- Enter a value between 40-1000 milliseconds for Beacon Interval
- Here you can specify the RTS (Request to Send) Threshold. If the
- This value is the maximum size determining whether
- This value determines the interval of the Delivery Traffic Indication
search engine
Middle or Low which you would like to specify for the
Configure
32