TP-Link TL-WR841N User Manual page 42

Chapter 4
Done!
Downloaded from ManualsNet.com
For example, the personal website has been built in my home
PC (192.168.0.100). I hope that my friends on the Internet can
visit my website in some way. My PC is connected to the router
with the WAN IP address 218.18.232.154.
Personal Website
1. Set your PC to a static IP address, for example 192.168.0.100.
2. Visit http://tplinkwifi.net, and log in with the username and
password you set for the router.
3. Go to
4. Click
Port list. The service port, internal port and protocol will be
automatically filled in. Enter the PC's IP address 192.168.0.100
in the
5. Leave the status as
Note:
• It is recommended to keep the default settings of
you are not clear about which port and protocol to use.
• If the service you want to use is not in the
the corresponding parameters manually. You should verify the port number that
the service needs.
• You can add multiple virtual server rules if you want to provide several services in
a router. Please note that the
Users on the Internet can enter
http:// 218.18.232.154) to visit your personal website.
Note:
• If you have changed the default
Service Port
• Some specific service ports are forbidden by the ISP, if you fail to visit the website,
please use another service port.
search engine
Router
LAN
WAN: 218.18.232.154
Home
Forwarding > Virtual Servers.
Add New. Select HTTP
IP Address field.
Enabled and click Save.
Service Port
http:// WAN IP
Service
to visit the website.
Configure
from the Common Service
Internal Port and Protocol
Common Service Port list, you can enter
should not be overlapped.
(in this example:
Port, you should use http:// WAN IP:
if
38