TP-Link TL-WR841N User Manual page 26

Chapter 4
• Detect Online Interval
interval. The default value is 0. You can input the value between 0 and 120. The value
0 means no detect.
• Primary DNS/Secondary DNS
to the router, please select
dotted-decimal notation of your ISP's primary DNS server. If a secondary DNS server
address is available, enter it as well.
BigPond Cable
If your ISP provides BigPond cable connection, please select
• User Name/Password
fields are case-sensitive.
• Auth Server
• Auth Domain
• MTU Size
the default MTU size unless required by your ISP.
• Connection Mode
•
Downloaded from ManualsNet.com
- The router will detect Access Concentrator online at every
- If your ISP does not automatically assign DNS addresses
Use the following DNS servers
- Enter the user name and password provided by your ISP. These
- Enter the authenticating server IP address or host name.
- Type in the domain suffix server name based on your location.
- The default MTU size is 1480 bytes. It is not recommended that you change
Connect on Demand - In this mode, the Internet connection can be terminated
automatically after a specified inactivity period (Max Idle Time) and be re-
established when you attempt to access the Internet again. If you want to keep
your Internet connection active all the time, please enter 0 in the
field. Otherwise, enter the number of minutes you want to have elapsed before
your Internet access disconnects.
search engine
Configure
and enter the IP address in
BigPond Cable.
Max Idle Time
22