TP-Link TL-WR841N User Manual page 80

2 ) Click Save.
Note: Log in to the web management page again if the IP address of the router is altered.
3. Survey the SSID to be bridged:
1 ) Go to
2 ) Click Survey, locate the root router's SSID and click
3 ) If the root router is set with a wireless password, you should enter the wireless
4 ) Click Save.
4. Disable DHCP:
1 ) Go to DHCP, select Disable, and click Save.
Now you can go to
means WDS bridging is successfully built.
Downloaded from ManualsNet.com
Wireless > Wireless Settings
TP-LINK_2512 as example).
password of the root router.
Status to check the WDS status. When the
search engine
and click Enable WDS Bridging.
Choose (Here we take
WDS status is Run, it
76