TP-Link TL-WR841N User Manual page 66

Chapter 4
•
PPPoEv6
•
•
•
•
•
•
•
Downloaded from ManualsNet.com
Secondary DNS - Enter another DNS IPv6 address in colon-hexadecimal
notation provided by your ISP.
PPPoE Session - The PPP session type for IPv6 connection. There are two types:
• Share with PPPoEv4
• Create a new Session
sessions. It is default to select this option.
Username/Password - Enter the username and password provided by your ISP.
These fields are case-sensitive.
Address Mode - The way to get the IPv6 address and prefix.
• SLAAC - Get the IPv6 address and prefix by router advertisement.
• DHCPv6 - Get the IPv6 address and prefix by DHCPv6.
IPv6 Address - The IPv6 address assigned by your ISP dynamically.
Default Gateway - Display the default gateway in colon-hexadecimal notation
provided by your ISP.
MTU (in bytes) - The normal MTU (Maximum Transmission Unit) value is 1492
Bytes. For some ISPs, you may need to modify the MTU. But this is rarely
required, and should not be done unless you are sure it is necessary for your
ISP connection.
Get IPv6 DNS Server Automatically
address, keep the default selection
DNS servers will be assigned from ISP dynamically.
search engine
- The PPPoEv6 and PPPoEv4 use the same PPP session.
- The PPPoEv6 and PPPoEv4 use different PPP
- If your ISP does not give you any DNS IPv6
Get IPv6 DNS Server
Configure
Automatically, and the
62