Checking The Keyboard Connection; Disconnecting The Keyboard; Configuring The Keyboard - HP iPAQ h6310 User Manual

Checking the Keyboard Connection

After you've connected the keyboard to your iPAQ Pocket PC, if
you press a key on the keyboard and the letter does not register,
perform the following steps to check your keyboard connection:
1. Be sure the Thumb Keyboard is securely connected to your
iPAQ Pocket PC.
2. If the connection is secure, go to Start > Settings > System
tab > iPAQ Keyboard and be sure the Enable Keyboard
check box is checked.
3. Insert your cursor in the Test here box and tap the keyboard
to see if it types characters in the box.
4. If characters appear in the Test here box, tap OK.
5. Use your stylus to press the Reset button on the left side of
your iPAQ Pocket PC.

Disconnecting the Keyboard

To disconnect the keyboard from your iPAQ Pocket PC, push in
the two buttons on the side of the keyboard to release it, then pull
the Pocket PC from the keyboard.

Configuring the Keyboard

You can configure several features on your Thumb Keyboard. To
customize your keyboard:
1. On your Pocket PC, select Start > Settings > System tab >
iPAQ Keyboard.
2. Select the Setting tab.
3. Do one or more of the following:
❏
❏
User's Guide
Tap the Enable Keyboard check box to enable or
disable the keyboard functionality.
Tap the Enable Sound check box to hear a click every
time you press a key.
Learning Input Methods
3–13