Changing Tcp/Ip Settings - HP iPAQ h6310 User Manual

4. Tap the appropriate adapter to modify the settings. The IP
address appears in the IP Address box.

Changing TCP/IP Settings

NOTE:
networks now use dynamically-assigned IP addresses. You will
not need to change TCP/IP settings unless your ISP or private
network does not use dynamically-assigned IP addresses. If you
are not sure, check with your network administrator.
To change TCP/IP Settings:
1. Contact your ISP or network administrator to determine your
IP address, subnet mask, and/or default gateway (if needed).
2. Be sure Wi-Fi is powered on.
3. From the Start menu, tap Settings > Connections tab >
Connections icon > Advanced tab > Network Card button
> Network Adapters tab.
User's Guide
Most Internet Service Providers (ISPs) and private
Using Wi-Fi
7–13