Automatically Connecting To A Network; Manually Entering New Network Settings - HP iPAQ h6310 User Manual

1. Tap the Data Connectivity icon in the Navigation bar.
2. When the drop-down Connectivity box displays, tap either
Turn off Wi-Fi or Turn on Wi-Fi.
Battery Saving Tip: Turn Wi-Fi off when you are not using it.

Automatically Connecting to a Network

1. If one or more networks are present, the Wi-Fi icon (
appears in the Navigation bar. Tap the network you want to
connect to, then tap whether the network connects to the
Internet (does not use proxy settings) or Work (uses proxy
settings).
2. If you are prompted for a Network Key (WEP), enter it and
tap Connect. If you are not sure, contact your network
administrator.

Manually Entering New Network Settings

A wireless network can be added either when the network
is detected (the Wi-Fi icon is visible in the Navigation bar) or
manually by entering setting information. To manually add a
wireless network:
1. From the Today screen, tap the iPAQ Wireless icon (
User's Guide
Using Wi-Fi
)
).
7–5