Table of Contents
Advertisement
399310-xx1.book Page 25 Friday, December 16, 2005 3:52 PM
You must call the service provider to activate your mobile phone service. Your
carrier may require the following information to activate your service:
• SIM Card Serial Number (printed on the box label or on the back of the
SIM card)
• IMEI Number (printed on the HP iPAQ label under the removable battery)
Your mobile phone service representative provides you your wireless phone
number and help you set up your service.
Turning on Your Phone Functions
To turn on phone functions:
1. On the Today screen, tap iPAQ Wireless.
2. Tap the Phone tab, and then tap Status: Off to activate the phone.
3. Once the phone is on, press the Answer/Send button
keyboard to access the on-screen phone keypad or to answer or send a call.
Checking Your Connection and Signal Strength
After you insert an active SIM card into your HP iPAQ, your unit connects to your
service provider's network.
The
icon indicates that you are connected to your service provider's network.
A full strength connection is indicated by the
in the icon diminish as the signal strength diminishes. No bars indicate no signal.
Making a Phone Call
1. Press the Answer/Send button
2. Enter the phone number of the person you want to call.
3. Tap the on-screen Talk button.
Answering a Call
To answer a phone call, press the Answer/Send button
on the on-screen phone keypad.
When you receive a phone call, you can answer or ignore the call, the phone stops
ringing and the caller may be sent to voicemail, depending on your mobile phone
service provider. To disregard the call, tap Ignore on the on-screen keypad or
press the End button.
on the
icon. The number of vertical bars
on the Thumb keyboard.
or tap Answer
25
Advertisement
Table of Contents
