Creating A Gprs Connection - HP iPAQ h6310 User Manual

Creating a GPRS Connection

1. If you tapped GPRS, the next screen requires you to fill in the
following GPRS configuration information. You can get this
information from your GPRS Service Provider if you do not
have it.
❏
❏
❏
2. Tap Next to continue.
3. In the next screen, select the IP Address to be used during
your connection:
❏
❏
4. Tap Next.
5. In the next screen, configurate the name-servers to be used
during your connection.
a. Select one of the following:
b. Enter the required information (DNS, DNS aux, WINS,
6. Tap Next.
NOTE:
to display at this point is the SMS Text Message screen. Skip to
the section on "Creating an SMS Text Message Connection."
4–30
APN: Access Point Name of the server that you want to
connect.
Name: Log On name for your connection.
Password: Password for your connection.
Dynamic IP Address
Static IP Address
◆
Dynamic IP addresses
◆
Static IP addresses
and WINS aux).
When you are creating a new connection, the next screen
Using the Phone Features
User's Guide