Volume Controls - Inter-Tel AXXESS User Manual

Inter-Tel AXXESS

VOLUME CONTROLS

Volume levels for various keyset functions can be adjusted by pressing one edge of
the VOLUME feature key to adjust the volume up or down. On some keysets there are
up and down arrows on the key; on other keysets an illustration on the key (that looks
like this
end in place of the down arrow and the higher end in place of the up arrow.
To change your keyset volume levels:
— To adjust the volume levels of the eight basic functions of your keyset, press
to increase the volume or press
VOL
tening to or performing one of the following:
• Handset intercom call (changes handset intercom voice volume)
• Speakerphone intercom call (changes handsfree intercom voice volume)
• Handset outside call (changes handset outside call voice volume)
• Speakerphone outside call (changes handsfree outside call voice volume)
• Background music through the keyset speaker (changes background music
volume)
• Ringing through the keyset speaker (changes ringing alert tone volume)
Note: To change the ringing alert tone while your keyset is idle, press
and
volume by pressing
cally saved.
• Intercom dial tone through the handset (changes handset progress tone vol-
ume)
• Intercom dial tone through the keyset speaker (changes speakerphone prog-
ress tone volume)
— If desired, press
for the particular function. If this step is not performed, the keyset will retain the
previously saved volume level for that function (except for the ringing alert tone
volume, which is automatically saved at the most current volume level).
To return your keyset to the default volume levels:
— Dial
3 9
call forwarding, background music, and queue requests; and restores handsfree
mode, pages, hunt group calls, and system forwarding.)
) represents higher and lower volume levels. Press the lower
at the same time to hear the current volume. Then adjust the
VOL
or
VOL
and
VOL VOL
. (Dialing this feature code also cancels do-not-disturb, manual
4
Standard & Basic Keyset User Guide
to decrease the volume while lis-
VOL
. The selected volume level is automati-
VOL
at the same time to save the new volume level
37
VOL