Remote Programming - Inter-Tel AXXESS User Manual

Inter-Tel AXXESS

REMOTE PROGRAMMING

The Remote Programming feature allows a user to place a phone in do-not-disturb
mode (DND) or forward the station's calls, either from another station or through
DISA. For your convenience, a pocket-sized Remote Programming guide is attached
to the card stapled in the middle of this guide.
To access to the Remote Programming feature:
— EITHER, Call your AXXESS DISA number (provided by your system adminis-
trator). If required, enter your DISA password.
OR, use any phone on the system.
— Enter
3 5
— Enter extension to be programmed.
— Enter the extension's password followed by
following features.
To change the station password using Remote Programming:
— Enter
3 9
— Enter the new password, followed by
— Enter the new password again for verification, followed by
To turn on Do-Not-Disturb:
— Enter
3 7
— Enter message number (01--20) and, if desired, enter the optional second-line
message text.
— Hang up.
To turn off Do-Not-Disturb:
Enter
3 7
To turn on Call Forward:
— Enter one of the following Call Forward feature codes.
$OO &DOOV
              
,I %XV\                
— Enter an extension number or enter a trunk access code followed by an outside
telephone number.
— Hang up.
To turn off Call Forward:
Enter
3 5
.
9
.
2
.
0
and hang up.
1


and then press
5 #
Standard & Basic Keyset User Guide
. You can now use any of the
#
.
#
,I 1R $QVZHU
            
,I 1R $QVZHU%XV\
and hang up.
33
.
#