Multilingual Capability; Station Password - Inter-Tel AXXESS User Manual

Standard and basic digital keyset

Hide thumbs Also See for AXXESS:

Table of Contents

Standard & Basic Keyset User Guide

Multilingual Capability

Your telephone system may provide a choice between English and Japanese prompts

and displays. An option in the database determines the language that will be used by

each phone. If your keyset is programmed for English, all displays appear in English

and all AXXESSORY Talk voice mail prompts are delivered in English (unless

changed, as outlined below). If programmed for Japanese, all displays appear in Kata-

kana characters and all voice prompts are played in Japanese (unless changed). By

default, all phones are set for English.

Keyset-programmed messages can include English or Katakana characters, or a com-

bination. In displayed lists, such as directories, the English characters are alphabetized

before the Katakana characters. Therefore, Katakana names will appear after the

English names.

To change the assigned language for your phone:

— Dial

shows the current language.

This password is used for the Remote Programming feature described on the next page.

To change the station password from your station:

— Dial

— Enter your current password, followed by

number.)

— Enter the new password followed by

— Enter the new password again for verification followed by

firmation tone.

To change the station password using remote programming: See next page.

to change between English and Japanese, as desired. Your display

. (At default it is your extension

. You hear a confirmation tone.

Inter-Tel AXXESS

. You hear a con-

Table of Contents