Oiling In Shuttle Area And Needle Bar - Singer Futura CE-150 Service Manual

Oiling in Shuttle area and Needle bar

Oiling in Shuttle area
1. Remove Bobbin cover and Needle plate.
2. Remove Bobbin case by lifting out from the left side.
3. Using the brush provided, clean around the whole exposed area, and then apply a little oil in the place
(A).
A
Oiling in Needle bar
1. Remove face cover and then place one or two drops oil at Needle bar clamp (B) & (C).
Oiling in Idler pulley
1. Put one drop oil to center shaft of
Idler pulley, when removing rear
cover.
D
40 Singer Furtura III series