Schwinn 130/510U Service Manual page 48

7. Insert 2.5" x 10" cardboard between the Brake Magnet (C) and the
Flywheel (B), and tape the cardboard to the Brake Magnet.
Note: Be sure the cardboard covers all of the Brake Magnet.
B
8. Slowly turn the Drive Pulley (D) backward and carefully ease the Drive
Belt (E) off the Drive Pulley to the outside.
Be sure to keep fi ngers clear of all pinch hazards as
you turn the Drive Pulley.
9. Using needlenose pliers, carefully release the spring (F) on the Belt
Tensioner (G).
D
48
C
B
E
F
G