Schwinn 130/510U Service Manual page 35

16. Installation is the reverse procedure. Put the Left Shroud in position
first to align the screws for the Right Shroud. Install the top screws first.
Note: Self-tapping screws attach the Shrouds to the Frame.
NOTICE: Be sure not to pinch or cut any cables. Be sure the tabs in
the Top Shroud snap into the Main Assembly.
17. Attach the Pedals. Start the Pedals by hand, and then fully tighten
them with the Pedal Wrench. The Pedals must be fully tightened.
If the threads strip due to improper installation, then the
Pedals can disengage from the bike and/or break while under
usage, which can result in serious injury to the user.
Note: The Left Pedal is reverse-threaded. Be sure to attach
Pedals on the correct side of the Bike. Orientation is based
from a seated position on the bike. The Left Pedal has an "L",
the Right Pedal an "R".
18. Final Inspection
Inspect your machine to ensure that all hardware is tight and components
are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner's Manual.
(R)
35
(L)