Advertisement

130
Manual en Español Latino Americano:
ASSEMBLY MANUAL / OWNER'S MANUAL
http://www.schwinnfitness.com

Advertisement

Table of Contents
loading

Summary of Contents for Schwinn 130

  • Page 1 Manual en Español Latino Americano: ASSEMBLY MANUAL / OWNER’S MANUAL http://www.schwinnfitness.com...
  • Page 2: Table Of Contents

    | outside U.S. www.nautilusinternational.com | © 2016 Nautilus, Inc. | ® indicates trademarks registered in the United States. These marks may be registered in other nations or otherwise protected by common law. Schwinn, the Schwinn Quality logo, Schwinn 130, Bowflex, Nautilus, and...
  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Obey the following warnings: Read and understand all warnings on this machine. Carefully read and understand the Assembly instructions. •...
  • Page 4 • Do not operate this machine outdoors or in moist or wet locations. Keep the foot pedals clean and dry. and passage around and emergency dismounts from the machine. Keep third parties out of this space when machine is in use. •...
  • Page 5: Safety Warning Labels / Serial Number

    SAFETY WARNING LABELS AND SERIAL NUMBER WARNING! • Injury or death is possible if caution is not used while using this machine. • Keep children and pets away. • Read and follow all warnings on this machine. Serial number additional warnings and safety information.
  • Page 6: Specifications

    SPECIFICATIONS Maximum User Weight: 300 lbs. (136 kg) Power Requirements: Operating Voltage: 9VDC Operating Current: 1.5A Regulatory Approvals: AC Power Adapter: UL listed, CSA certified (or equivalent), Rated 120V 60Hz Input, 9VDC, 1500mA Output. Class 2. 55.6” (141cm) 41.3” (105cm) 21.4”...
  • Page 7: Parts

    PARTS 13 (R) 12 (L) Item Description Item Description Main Frame Seat Post Front Stabilizer Adjustment Knob Rear Stabilizer Seat Top Shroud Left Pedal (L) Mast Gasket Right Pedal (R) Console Mast (with Handlebar Mount) Water Bottle Holder Handlebars AC Adapter Console Handlebar Mount Cover Note: Media Cable is in a bag.
  • Page 8: Hardware

    HARDWARE / TOOLS Item Description Button Head Hex Screw M8 x 25 Lock Washer M8 Curved Washer M8 Flat Washer M8 T-handle Note: Select pieces of Hardware have been provided as spares on the Hardware Card. Be aware that there may be remaining Hardware after the proper assembly of your machine.
  • Page 9: Assembly

    1. Attach Stabilizers to Main Frame Note: Hardware(*) is pre-installed on the stabilizers and not on Hardware Card. Make sure transport wheels on the ® front stabilizer point forward, and the Schwinn decal on the rear stabilizer faces outward from the machine. 6 mm 6 mm 2.
  • Page 10 3. Install Handlebars on Console Mast NOTICE: Do not crimp the cables. Put the Handlebar (7) in the bracket (6a), adjust the Handlebar to the desired angle, and install the T-handle (E) through the holes. Use the pull cable in the Handlebar Mount to route the HR cable (7a) through the slot (6c) under the Handlebar Mount to the top of the mast.
  • Page 11 4. Install Console on Console Mast Note: Remove the pre-installed screws(*) from the back of the Console before you connect the cables. NOTICE: Do not crimp the cables.
  • Page 12 5. Install Seat Post on Frame NOTICE: Make sure the Adjustment Knob engages the Seat Post. Do not set the Seat Post position higher than the stop mark (STOP) on the tube. STOP 6. Attach Seat to Seat Post NOTICE: Be sure the Seat is straight. Tighten the nuts (11b) on the Seat bracket (11a) to hold the Seat in position.
  • Page 13 7. Install Pedals Note: The Left Pedal is reverse-threaded. Be sure to attach Pedals on the proper side of the Bike. Orientation is based from a seated position on the bike. The Left Pedal has an “L”, the Right Pedal an “R”. 13 (R) 12 (L)
  • Page 14 8. Install Water Bottle Holder Note: The hardware(*) is pre-installed on the Console Mast and not on Hardware Card. 9. Connect AC Adapter 10. Final Inspection Inspect your machine to ensure that all hardware is tight and components are properly assembled. Be sure to record the serial number in the field provided at the front of this manual.
  • Page 15: Leveling The Bike

    BEFORE YOU START Leveling Your Bike Levelers are found on each side of the Rear Stabilizer. Turn the knob to adjust the stabilizer foot. Make sure the bike is level and stable before you exercise. Moving Your Bike To move the upright bike, carefully tilt the Handlebars toward you while pushing the front of the bike downward. Push the bike to the desired location.
  • Page 16: Features

    FEATURES Console Power Connector Handlebars Water Bottle Holder Adjustable Seat MP3 Input Adjustment Knob USB Port Pedals Contact Heart Rate (CHR) Sensors Stabilizers Speakers Levelers Fully Shrouded Flywheel Media Tray Transport Rollers Media Cable WARNING! Use the values calculated or measured by the machine’s computer for reference purposes only. The heart rate displayed is an approximation and should be used for reference only.
  • Page 17: Console Features

    Console Features The Console provides important information about your workout and lets you control the resistance levels while you exercise. ™ The Console features the Schwinn Dual Track display with touch control buttons to navigate you through the exercise programs.
  • Page 18 Resistance Level Quick Buttons- Shifts the resistance levels to the setting quickly during a workout Achievement Indicator Lights- when a workout result is reviewed, the achievement indicator light will activate. ™ Schwinn Dual Track Display Upper Display Data Program Display...
  • Page 19 Achievement Display The Achievement Display activates when a workout goal is reached or a workout milestone is surpassed from past workouts. The Console display will congratulate and inform the User of their achievement, along with a celebratory sound. Lower Display Data The Lower Display shows the Workout Values and can be customized for each User.
  • Page 20: Contact Heart Rate (Chr)

    USB Charging If a USB Device is attached to the USB Port, the Port will attempt to charge the Device. The power supplied from the USB Port may not be enough to operate the Device and charge it at the same time. Contact Heart Rate Sensors Contact Heart Rate (CHR) sensors send your heart rate signals to the Console.
  • Page 21 The graph is a brief guideline, describing the generally suggested target heart rates based on age. As noted above, your opti- mal target rate may be higher or lower. Consult your physician for your individual target heart rate zone. Note: As with all exercises and fitness regimens, always use your best judgment when you increase your exercise time or intensity.
  • Page 22: Operations

    OPERATIONS What to Wear Wear rubber-soled athletic shoes. You will need the appropriate clothes for exercise that allow you to move freely. How Often Should You Exercise Consult a physician before you start an exercise program. Stop exercising if you feel pain or tightness in your chest, become short of breath, or feel faint.
  • Page 23: Quick Start / Manual Program

    Push OK to set. Units of Measurement: Push the Increase/Decrease buttons to adjust between “MILES” (Imperial English) or “KM” (metric). Push OK to set. The Console goes back to the Power-Up / Idle Mode screen. Note: To adjust these selections, consult the “Console Set-Up Mode” section. Quick Start ( Manual ) Program The Quick Start ( Manual ) program lets you start a workout without entering any information.
  • Page 24 Edit User Profile From the Power-Up Mode screen, push the Increase( ) or Decrease( ) buttons to select one of the User Profiles. 2. Push the OK button to select the User Profile. 3. The Console display shows the EDIT prompt and the current User Profile name. Push OK to start the Edit User Profile option.
  • Page 25: Profile Programs

    6. Push OK to make your selection. The Console will go to the Power-Up Mode screen. Changing Resistance Levels Push the Resistance Level Increase( ) or Decrease( ) buttons to change the resistance level at any time in a workout program.
  • Page 26 Workout Profile and Goal Program The Console lets you select the Profile Program and type of Goal for your workout (Distance, Time or Calories), and set the Goal value. 1. Sit on the machine. 2. Push the Increase( ) or Decrease( ) buttons to select the correct User profile. 3.
  • Page 27: Pausing Or Stopping

    2. Push the Increase( ) or Decrease( ) buttons to select the percentage of maximum heart rate: 50–60%, 60–70%, 70–80%, 80–90%. Consult a physician before you start an exercise program. Stop exercising if you feel pain or tightness in your chest, become short of breath, or feel faint. Contact your doctor before you use the machine again. Use the values calculated or measured by the machine’s computer for reference purposes only.
  • Page 28: Results

    Console automatically goes into Sleep Mode. GOAL TRACK Statistics (and Achievements) The statistics from every workout are recorded to a User Profile. The Schwinn Dual Track ™ Console shows the Goal Track workout Statistics on the Lower Display in three channels:...
  • Page 29 4. Push the Increase( ) button to move to “BMI”, or Body Mass Index. The Console will display the BMI value based on the User settings. Be sure the height value is correct for your User Profile, and the weight value is current. The BMI Measurement is a useful tool that shows the relationship between weight and height that is associated with body fat and health risk.
  • Page 30: Console Setup Mode

    CONSOLE SETUP MODE The Console Setup Mode lets you input the date and time, set the units of measurement to either English or Metric, change the machine type, control the sound settings ( on/ off), or see maintenance statistics (Error Log and Run Hours – for service technician use only).
  • Page 31: Maintenance

    MAINTENANCE Read all maintenance instructions fully before you start any repair work. In some conditions, an assistant is necessary to do the necessary tasks. Equipment must be regularly examined for damage and repairs. The owner is responsible to make sure that regular maintenance is done.
  • Page 32 Maintenance Parts Console HR Cables Flywheel Console Mast CHR Sensors Brake Assembly Pedals Seat RPM Sensor Crank Arms Seat Post w/ Slider Speed Sensor Magnet Left Shroud Adjustment Knob Servo Motor Power Inlet Seat Post Shroud Drive Belt Right Shroud Water Bottle Holder Drive Pulley Top Shroud...
  • Page 33: Troubleshooting

    TROUBLESHOOTING Condition/Problem Things to Check Solution No display/partial display/ Check electrical (wall) Make sure unit is plugged into a functioning wall outlet. unit will not turn on outlet Check connection on Connection should be secure and undamaged. Replace adapter console or connection at unit if either are damaged.
  • Page 34 Condition/Problem Things to Check Solution Check data cable Be sure cable is connected securely and oriented properly. Re- connections/orientation seat all connections. Small latch on connector should line up and snap into place. Check Servo Motor If magnets move, adjust until they are within the proper range. (requires shroud removal) Replace Servo Motor if not functioning properly.
  • Page 35: Warranty

    WARRANTY Who Is Covered This warranty is valid only to the original purchaser and is not transferable or applicable to any other person(s). What Is Covered Nautilus, Inc. warrants that this product is free from defects in materials and workmanship, when used for the purpose intended, under normal conditions, and provided it receives proper care and maintenance as described in the Product’s Assembly and Owner’s manual.
  • Page 36 Nautilus Bowflex Schwinn Universal ® ® ® ® 8011548.080118.C...

Table of Contents