Updating The Footswitch Symbols - Siemens ARCADIS Varic Installation Instructions Manual

16

Updating the footswitch symbols

•
The accessory kit contains several symbols for the new footswitch. Affix them to the
footswitch as follows:
- Affix "Save Image" symbol
- Affix "Select Mode" symbol
- Affix "Release Radiation Pedal" symbol
- Affix "Fluoro Pedal" symbol
NOTE
Fig. 11: "Save Image" symbol
ARCADIS Varic/Orbic
Mechanical installation and wiring
(Fig. 11 / p. 16)
(Fig. 12 / p. 17) here:(2/Fig. 15 / p.
(Fig. 13 / p. 17) here:(4/Fig. 15 / p.
For the ARCADIS Varic and ARCADIS Orbic, the functions of the
two footswitch pedals (up to software version VB13C) cannot be
changed. From software version VB13C onward, the foot pedal
functions will be alterable via the software.
The following description applies to the configuration with soft-
ware version VB13C and to the as-delivered state (default pro-
gramming) with software version VB13C or higher.
With software versions VB13C and higher, if the foot pedal func-
tions are swapped via reprogramming, the symbols to be affixed
must correspond to the functions that have been reprogrammed.
(Affix "Fluoro
(3/Fig. 15 / p. 18);
(Fig. 14 / p. 18)
SPR2-310.812.03.01.02
09.06
here: (1/Fig. 15 / p.
(Fig. 14 / p. 18) here:(3/Fig. 15 / p.
Pedal" symbol
affix "Release
here: (4/Fig. 15 / p. 18))
Page 16 of 20
CS PS SP
18).
18).
18).
(Fig. 13 / p. 17)
Radiation Pedal"
Siemens AG
Medical Solutions
2.2
18).
here:
symbol