F81 Security Code - SMC Networks ZSE20B-L Operation Manual

■[F81] Security code
The security code can be turned on or off and the security code can be changed when unlocked.
<Operation>
Press the or
Security code
Press the or
[oFF] (not use) is
selected
Press the
button to return to
function selection
mode.
button in function selection mode to display [F81].
Press the button.
button to select the setting of security code.
[on] (use) is selected
Press the button to set.
Security code checking
Press the or
security code on the sub display (right).
(The default setting is [000].)
For instructions on how to enter the security code, refer to "How to input
and change the security code" on page 61.
If the security code entered is incorrect, [FAL] will be displayed, and the
security code must be entered again.
If the wrong security code is entered 3 times, [nG] is displayed and the
device returns to function selection mode.
Press the
1 second to set.
Move on to security code.
Move on to security code checking.
button to input the
∗
button for
Move on to security code changing.
-50-
No.PS※※-OMV0006-D