Sony Jumbotron JME-UA200 Service Manual page 6

Unit alignment controller
Table of Contents

Advertisement

Owner's Record
The model and serial numbers are located on the rear.
Record the serial number in the space provided below.
Refer to these numbers whenever you call upon your Sony
dealer regarding this product.
Model No. JME-UA200
Serial No.
WARNING
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified
personnel only.
2
For the customers in the U.S.A.
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
Table of Contents
Overview
About This Manual ............................................................. 4
Precautions ........................................................................ 4
Overview of the JumboTron System ................................ 5
Images to be displayed on the JumboTron screen .................. 5
Structure of the JumboTron screen ......................................... 6
Configuration of the JumboTron system ................................. 7
Features .............................................................................. 8
Locations and Functions of Parts and Controls
Front panel .............................................................................. 9
Rear panel ............................................................................. 10
Connections
Connections ..................................................................... 11
Connecting a JumboTron display unit .................................. 11
Connecting several JumboTron display units ....................... 11
Adjustments and Checkings
Display Unit ................................................................. 12
Adjusting the Luminance Manually ............................... 16
Using a Sensor ............................................................ 23
Selecting the check mode ...................................................... 28
its initial condition (UNIT Reset) .................................... 29
JumboTron display unit (LED Check) ............................. 30
display unit (Cursor Check Menu) ................................... 31
JumboTron display unit (UNIT SPG) .............................. 32
JumboTron display unit (Ask UNIT Type) ...................... 33
Menu) ............................................................................... 34
unit (Unit Condition) (LDU-15 only) .............................. 38
Speed) (LDU-15 only) ..................................................... 38
Others
Specifications .................................................................. 39
3

Advertisement

Table of Contents
loading

Table of Contents