HP Visualize J2240 Service Handbook page 99

PDCE_HPMC Memory Fault Codes
The following codes are displayed by the PDCE_HPMC handler when an HPMC has
occurred and the Memory controller has an eror logged. These codes are different
than the fault codes displayed when there is a memory fault during memory config
test or init.
Table 4–12. PDCE_HPMC MEMORY FAULT Codes
Ostat Code Name
FLT 7D00 HPMC_MEM_ERROR
FLT 7D01 HPMC_ICACHE_PARITY_ERROR
FLT 7D02 HPMC_DCACHE_PARITY_ERROR
FLT 7D03 HPMC_MSI_READ_ERROR
FLT 7D04 HPMC_MSI_WRITE_ERROR
FLT 7D05 HPMC_RUNWAY_ERROR
FLT 7D06 HPMC_WRITE_BOMB_ERROR
FLT 7D07 HPMC_MEMORY_ADDR_ERROR
FLT 7D08 HPMC_MULTI_BIT_ERROR
FLT 7D09 HPMC_SINGLE_BIT_ERROR
FLT 7D0A HPMC_BAD_ADDR
4–48 Troubleshooting
Notes
HPMC is in memory system
Icache parity error in memory test
Dcache parity error in memory test
MSI read timeout
MSI write timeout
Runway parity error
Write bomb error
Memory address error
Multi–bit memory error
Single–=bit memory error
Address did not map to bank