HP Visualize J2240 Service Handbook page 204

3.
When the system has completely shut down, power on your workstation.
If Autoboot is turned off, the boot sequence automatically stops at the boot console
Main Menu.
If Autoboot is turned on, you will see the following messages:
Processor is starting Autoboot process. To discontinue, press any key
within 10 seconds.
If Autoboot and Autosearch are both turned on, you will see the following messages:
Processor is booting from first available device. To discontinue, press
any key within 10 seconds.
NOTICE: If you are using a power–saving monitor, you will
have less than 10 seconds from the time this message
appears to press a key.
4.
Press a key. You will then see the message:
Boot terminated
The Main Menu of the boot console appears.
10–2 Boot Console