HP Visualize J2240 Service Handbook page 209

To list devices that contain bootable media, follow the directions in "Accessing the
Boot Console Interface" earlier in this appendix, and then type the following at the
prompt:
Main Menu:Enter command >
The search command searches all buses. The search may turn up more devices than
there are lines on your display. If you are using a text terminal, you may control the
progress of the search from your terminal's keyboard by performing the following
steps:
D
To hold the display temporarily, press Ctrl S
D
To continue the display, press Ctrl Q
D
To halt the search, press any other key
These flow–control commands do not work with a bitmapped display, but such a
display can show more than forty lines of text, so you are unlikely to need them.
To search for devices of just one type that actually contain bootable media, follow the
directions in "Accessing the Boot Console Interface" earlier in this appendix, and
then type the following at the prompt:
Main Menu: Enter command >
Where device_type is one of the following:
fwscsi is the built–in fast, wide SCSI bus
sescsi is the built–in single–ended SCSI bus
lan is all connections to the built–in LAN
gscn is a fast, wide SCSI interface in slot number n
search ipl Enter
Enter
Enter
search ipl device_type
Enter
Boot Console 10–7