HP Visualize J2240 Service Handbook page 100

Table 4–13. I/O DEVICE FAULT Codes
Ostat Code Name
TEST 8000 GECKOBOA_REG
TEST 8400 LASI_TEST
TEST 8404 LASI_TEST_RS232
TEST 8405 LASI_TEST_SCSI
TEST 8406 LASI_TEST_LAN
TEST 8407 LASI_TEST_KYBD
TEST 8500 WAX_EISA_MAP_TEST
TEST 8501 WAX_EISA_ID_TEST
TEST 8C06 PCI_BIST_TEST
TEST 8C10 INIT_PCI
TEST 8C11 TEST_PCI_COMPLETE
TEST 8C12 INIT_PCI_COMPLETE
TEST 8C20 INIT_PCI
TEST 8C21 TEST_PCI_COMPLETE
TEST 8C22 INIT_PCI_COMPLETE
WARN 80F3 ERR_READING_IODC_BYTES
WARN 80F4 ERR_READING_EINIT
WARN 80F5 ERR_EXEC_EINIT
WARN 80F6 ERR_READING_EIO
WARN 80F7 ERR_ENTRY_IO_ERR
WARN 80F8 INVALID_DEVICE_CLASS
WARN 80F9 ERR_READIN_ETEST
WARN 80FA ERR_EXEC_ETEST
WARN 80FC INVALID_DEVICE
WARN 811A HOT_SWAP_RETRY
WARN 8FFF LATE_ST_WARN
FLT 8001 GECKOBOA_REG_0100
FLT 8002 GECKOBOA_REG_0105
FLT 8003 GECKOBOA_REG_0110
FLT 8004 GECKOBOA_REG_0115
FLT 8005 GECKOBOA_NIO
Notes
Begin LASI tests
Start exec dev's BIST test
Test complete for DINO on GSC bus 1
PCI init complete for DINO on GSC bus 1
Test complete for DINO on GSC bus 2
PCI init complete for DINO on GSC bus 2
PDC_IODC failed to retrieve header info
PDC_IODC failed to return entry_init
PDC_IODC failed to execute entry_init
PDC_IODC failed to return entry_io
PDC_IODC failed to return entry_test
Boot disk failed to spin up, retrying after
waiting amount of time specified by the waiting amount of time specified by the
BootTimer value*
UBC register failed
LBC register failed
Error register failed
CMD_RST_ST failed
Troubleshooting 4–49