HP Visualize J2240 Service Handbook page 201

ISL User Commands
The following commands available in the ISL environment allow you to display and
modify the boot characteristics of the system.
D
help – lists ISL command menu and available utilities.
D
display – displays the boot and console paths in Stable Storage and the current
setting of the ISL Boot Flags.
D
primpath – modifies the primary boot path entry in Stable Storage. The entry
in Stable Storage for the primary boot device begins at byte address 0 and ends
at byte address 31.
D
altpath – modifies the alternate boot path entry in Stable Storage. The entry for
the alternate boot device begins at byte address 128 and ends at 159.
D
conspath – modifies the console path entry in Stable Storage. The entry in
Stable Storage for the console device begins at byte address 96 and ends at byte
address 127. The entry for the keyboard and mouse devices begins at byte ad-
dress 160 and ends at 191.
D
listautofl or lsautofl – lists the contents of the (HP-UX) autoboot file.
D
support – boots the Support Tape from the boot device.
D
readss – displays 4 bytes (one word) from Stable Storage. The readss com-
mand requires a decimal number between 0 and 255 to address four bytes in
Stable Storage.
Boot Console 9–19