Chap5.doc 99 Thu Jul 25 10:24:29 1996
NOTICE:
Figure 28
Storage Tray Assembly
Before removing the Storage Tray Assembly, remove
the Main Tray Assembly from the system unit.
The Storage Tray Assembly does not have to
be removed from the system unit to access a
hard disk drive or the 3.5-inch floppy drive.
Perform the following steps to remove the storage tray
assembly from the Main Tray:
1 Pull the tab on the memory retainer and slide it toward
the front of the main tray to remove it, as shown in
Figure 28
Removing the Memory Retainer
Field Replaceable Units
FRU Removal and Replacement
99