Chap5.doc 96 Thu Jul 25 10:24:29 1996
Figure 25
Field Replaceable Units
FRU Removal and Replacement
4 Line up the memory module with the guides making sure
that the notched end of the memory module is toward the
white ejector tabs (front of the main tray), as shown in
Figure 25.
White Ejector Tab
Installing Memory Modules
5 Press firmly and evenly on the memory module to ensure
that it is fully seated.
6 To verify that this installation was successful, display the
current memory information using the Boot Console In-
terface.
For more information on the Boot Console Interface, see
Chapter 9 of this manual.
If only a faulty memory module is replaced, use the pdt
clear command in the service menu of the Boot Console
Interface. Answer y to the prompt
96
.
Continue? (Y/N)