Displaying The Current Monitor Configuration - HP Visualize b160L Supplementary Manual

Service.book : Chap9.doc 176 Thu Jul 25 11:01:09 1996
NOTICE:
Boot Console Interface
Displaying and Setting the Monitor Type
When a dual display graphics adapter (an adapter
which has two video output connectors) is installed,
the video connector on the left (when looking at the
system from the rear) is graphics(NA) and the video
connector on the right is graphics(NB). Where N is the
slot number in which the graphics adapter is installed.
For example, a Dual Visualize Enhanced Graphics
Card (A4451A) installed in option slot 2 would be
graphics(2A) and graphics(2B).
There are graphics configuration restrictions
of which you must be aware when adding
graphics adapters or reconfiguring your
graphics devices. For details on graphics
configuration restrictions, see the subsection
"
Graphics Configuration
Appendix B.
Displaying the Current Monitor Configuration
To display the current monitor configuration for your
system from the Configuration Menu of the boot con-
sole interface, follow the directions in "Accessing the
Boot Console Interface" earlier in this appendix. Once
you are in the Boot Console Interface Main Menu,
type:
Main Menu: Enter command >
This places you in the Configuration Menu. From here
type:
Config Menu: Enter command>
176
" in
Restrictions
configuration
monitor