Chap5.doc 118 Thu Jul 25 10:24:29 1996
Figure 42
Field Replaceable Units
FRU Removal and Replacement
System Fans and Speaker
Before removing the fans, remove the Main Tray
Assembly from the system unit.
Perform the following steps to remove the system
fans:
1 Locate the desired fan or speaker connector on the back-
plane, push in the tab on the connector and disconnect it
from the backplane, as shown in Figure 42.
Disconnecting the Fan and Speaker Connectors
2 Pull up on the fan or speaker wire to remove it from the
slot in the backplane or fan shroud.
118