Storage Tray Assembly; Removing The Memory Retainer - HP Visualize b132L Service Handbook

Field Replaceable Units
FRU Removal and Replacement

Storage Tray Assembly

Before removing the Storage Tray Assembly, remove
the Main Tray Assembly from the system unit.
The Storage Tray Assembly does not have to
NOTICE:
be removed from the system unit to access a
hard disk drive or the 3.5-inch floppy drive.
Perform the following steps to remove the storage tray
assembly from the Main Tray:
1 Pull the tab on the memory retainer and slide it toward
Figure 28

Removing the Memory Retainer

114
the front of the main tray to remove it, as shown in
Figure 28