HP Visualize b160L Supplementary Manual page 87

Chap4.doc 65 Thu Jul 25 10:23:57 1996
To access the Support Tools Manager, perform the fol-
lowing steps:
1 In a terminal window, type the following at the # prompt
to invoke the command line interface:
# cstm
2 The following message appears:
Support Tool Manager
Type 'help' for a list of available com-
mands:
CSTM>
3 To verify the system operation, type the following at the
CSTM> prompt:
CSTM> verify all
Messages similar to the following appear:
Verification has started on device (CPU).
Verification has started on device (FPU).
CSTM>Verification of (FPU) has completed.
CSTM>Verification of (CPU) has completed.
4 Press Enter to return to the CTSM> after all test results
are reported.
5 To exit the Support Tools Manager, enter the following:
CTSM> exit
If any tests failed, run Self Test and ISL diagnostics to
isolate the problem.
Troubleshooting
Running System Verification Tests
Version A.01.00
65