Disconnecting The Speaker And Fan Connectors - HP Visualize b160L Supplementary Manual

Hp visualize b160l: supplementary guide
Hide thumbs Also See for Visualize b160L:
Table of Contents

Advertisement

Chap5.doc 125 Thu Jul 25 10:24:29 1996
Figure 48
Perform the following steps to remove the backplane:
1 Disconnect the two fan connectors and the speaker con-
nector by pushing in on the connectors locking tab and
pulling the connector, as shown in Figure 48.

Disconnecting the Speaker and Fan Connectors

2 Pull the fan and speaker cables out of the slots in the
backplane and fan shroud and move them so that they are
away from the backplane.
Field Replaceable Units
FRU Removal and Replacement
125

Advertisement

Table of Contents
loading

This manual is also suitable for:

B132l

Table of Contents