Installation Prerequisites - HP Visualize b132L Upgrade Instructions

Introduction
Introduction
This section introduces the Model B132L/B160 to a Model B180L upgrade.
Upgrading your Model B132L/B160L to a Model B180L
Your upgrade kit contains a Main Tray Assembly, which, when installed,
upgrades your Model B132L/B160L to a Model B180L.
B132L or Model B160
NOTE: Installing this upgrade in your Model does not affect the
regulatory and safety classifications or approvals. The upgraded system meets all of
the regulatory and safety standards listed in Appendix A of your original owner's
guide.

Installation Prerequisites

Before the Model B132L/B160L to a Model B180L Upgrade can be
performed, the current system must have an operating system version HP-
UX 10.20 with Additional Core Enhancements (ACE) or greater. The
graphics card option being moved to the new system must also be on the
supported list of cards. If it is not, use the built-in EG graphics or upgrade
the graphics card option to a supported configuration listed in "Prepare Your
Workstation".
1