NOTE
3 How to Install Accessories Inside Your PC
Installing Accessory Boards
Installing the Board
1 Before you install a non-Plug and Play accessory board, run the ISA
Configuration Utility in the Plug and Play group in Windows. See
page 33 for instructions.
PCI boards are configured automatically when installed in the PC.
2 Disconnect the computer's power supply cord.
3 Remove the computer's cover and power supply (see pages 24 and
26).
4 Find a free slot. Some boards may have preferred locations and
special installation instructions detailed in their manuals.
5 Unscrew and remove the slot cover. Store it in a safe place.
If the slot cover is tight, loosen the screws on the adjacent slots.
34
English