HP Vectra XM5 3 User Manual page 74

NOTE
4 Troubleshooting Your PC and Using the SETUP Program
If Your PC Does Not Start
If a Power-On-Self-Test Error Appears
Hewlett-Packard System Hardware
System BIOS (Version xx.xx.xx)
Video (Integrated VGA, Memory Size: 1 MB)
System Board (Pentium(TM) xxMHz)
Cache Memory
Keyboard/Mouse
Flexible Disk Drives (A: 1.44 MB)
Parallel Port (378h)
Serial Ports (3F8h)
Hard Disk Drives (C: xxx MB)
Ethernet (Integrated)
System Configuration
Error code(s): 0632
Keyboard Error
--------------------------------------------------------------
<View System Errors=ENTER> <Continue=F1> <Setup=F2> <Print=F7>
You can stop the memory test and jump to the next test by pressing
If an error is detected when the PC starts, a Power-On-Self-Test error
appears.
If the PC fails part of its Power-On Self-Test (POST) you should take
one of the following actions:
Press to display further information and corrective actions
•
(where applicable) for system errors.
Press to run SETUP and correct the System Configuration error
•
(refer to page 77 for information on using SETUP).
Press to continue and ignore the error. (It is recommended that
•
you fix the error before proceeding, even if the PC appears to start
successfully.)
Corrective actions for errors that may prevent your PC from starting
are described in the following table.
62 English
HP VECTRA PC
PASSED
PASSED
PASSED
PASSED
ERROR
PASSED
PASSED
PASSED
PASSED
PASSED
PASSED
.