Installing The Board - HP VECTRA XW User Manual

NOTE

Installing the Board

PCI boards are configured automatically when installed in the PC
Workstation.
1 Disconnect the computer's power cord and any telecommunications
cable.
2 Remove the computer's cover and power supply (see pages 24 and
29).
3 Find a free slot. ISA boards should be installed in the lowest available
slot and PCI boards in the highest available slot to ease cable routing.
Some boards may have preferred locations and special installation
instructions detailed in their manuals.
4 Unscrew and remove the slot cover. Store it in a safe place.
If the slot cover is tight, loosen the screws on the adjacent slots.
Unscrew and remove
the slot cover
2 How to Install Accessories Inside Your PC Workstation
Installing Accessory Boards
English 33