Table of Contents
Advertisement
4 Pivot the memory module to the vertical position.
5 Repeat this procedure for each memory module you are installing.
If you need to remove a main memory module:
6 Install any other accessories before replacing the cover and power
supply (see pages 25 and 27). Reconnect all cables and power
cords.
Completing the Main Memory Installation Procedure:
1 Switch on the PC. When
Power-On-Self-Test has detected a change in your memory
configuration), press
2 Check that SETUP has automatically detected and configured the
Memory Size fields. Ensure the TOTAL memory is correct. If it is
incorrect, check that you have correctly installed the memory
modules.
3 Set the extended memory limit field to
software designed for 286 and earlier processors that cannot work
with more than 16 MB total memory.
4 Press
to save and exit SETUP.
3 How to Install Accessories Inside Your PC
Release the retaining clip and
pull the module forward and out
of the socket
appears (indicating that the
Error 0250
to run SETUP.
if you have application
Y
Installing Memory
English
29
Advertisement
Table of Contents
