Replacing The Power Supply After Installing Accessories - HP Vectra XM5 3 User Manual

Replacing the Power Supply after Installing Accessories

1 Ensure that you have installed all of your accessories in the PC.
2 Position the power supply over the left-hand side of the PC, and
ensure that the cables are neatly routed around any accessory
boards.
3 Raise the front of the power supply and engage the hinge on the rear.
4 Lower the front of the power supply into position so it rests on the
front panel.
3 How to Install Accessories Inside Your PC
Removing and Replacing the Power Supply
English 27