HP Vectra XM5 3 User Manual page 76

Hp vectra xm5 3: user guide
Hide thumbs Also See for Vectra XM5 3:
Table of Contents

Advertisement

4 Troubleshooting Your PC and Using the SETUP Program
If Your PC Does Not Start
Explanation:
910B
1 You connected the flexible disk drive connector B to the disk drive, and
2 Change the flexible disk drive connector to A (refer to chapter 3).
BIOS Error Messages that May Prevent Your PC From Starting:
Boot program in
first sector of
diskette is invalid,
cannot start from
this diskette.
Cannot start from
hard disk.
Insert system
diskette in drive.
Press any key to
continue.
Missing operating
system
64
English
there is no connection to a drive A.
Explanation:
There is a problem with the disk drive, or the disk drive is
not properly formatted.
What you should do:
Insert a diskette with the proper operating system, and
press any alphanumeric key to continue.
Explanation:
• there is no diskette containing the operating system in
drive A, or
• the hard disk drive is disabled, or not present.
What you should do:
Insert a diskette with the proper operating system, and
press any alphanumeric key to continue.
Explanation:
You tried to start the PC but the PC could not find the
operating system.
What you should do:
Run SETUP and make sure the hard disk has been correctly
configured
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vectra xm 5/xxx - 3Vectra xm 5/xx series 3

Table of Contents