7 Replace the side bezel.
8 Connect the data and power cables to the rear of the drive.
The connectors are shaped to fit one way only.
Data cable
9 Slide the drive completely into the bottom shelf and secure it with
the screws provided with the device.
10 If a device was removed from the middle shelf, replace it.
11 If no device was removed from the middle shelf, replace the RFI
bezel.
12 Install any other accessories before replacing the cover (see page
25). Reconnect all cables and power cords.
3 How to Install Accessories Inside Your PC
Installing Mass Storage Devices
Power cable
English
51