Table of Contents
Advertisement
NOTE
If you need to remove the video memory module:
4 Install any other accessories before replacing the cover and power
supply (see pages 25 and 27). Reconnect all cables and power
cords.
Completing the Video Memory Installation Procedure
1 Switch on the PC.
2 Check that the Power-On-Self-Test has automatically detected and
configured the
Video RAM Size
3 When Windows is loaded, click on the Hputils group icon
display the Hewlett-Packard utilities.
4 Click on the HP User Tools icon
utility.
5 Click on the Video Mode icon
to change the video resolution and the number of colors displayed.
If you need to use a special video driver for your application, you may
be asked to insert a diskette containing the driver in drive A. In this case,
insert the video drivers diskette you created with the Master Disk
Creation utility. Alternatively, type
Windows applications) or type
DOS applications) and press
3 How to Install Accessories Inside Your PC
Release the retaining clip and
pull the module forward and out
of the socket
field.
to display the HP User Tools
and follow the screen messages
C:\MASTERS\VIDDRV\DISKWIN
C:\MASTERS\VIDDRV\DISKDOS
.
Installing Memory
to
(for
(for
English
31
Advertisement
Table of Contents
