Replacing The Power Supply After Installing Accessories - HP Vectra VL5 3 User Manual

Replacing the Power Supply After Installing Accessories

# $ K +
1. Ensure that you have installed all of your accessories in the PC.
2. Position the power supply over the left-hand side of the PC, and ensure that the cables are
neatly routed around any accessory boards.
3. Raise the front of the power supply and engage the hinge on the rear.
4. Lower the front of the power supply into position so it rests on the front panel.
#
ReplacingthePowerSupplyAfterInstallingAccessories.24
$
Replacing the Power Supply After Installing Accessories
K
Replacing the Power Supply After Installing Accessories
+
SECTION3:0025
HP Vectra VL5 PC User's Guide - Part 2Error! No text of specified style in document.
27
{bmc help0023.bmp}