Odi Os/2 Client Driver - HP Vectra VL6 7 Administrator's Manual

2 Installing Novell NetWare Drivers

ODI OS/2 Client Driver

ODI OS/2 Client Driver
An OS/2 computer gains access to NetWare servers by using the Requester for OS/2.
The Requester needs the OS/2 ODI driver to enable it to use the HP Ethernet
Family Adapter to access the LAN medium.
The OS/2 ODI driver
\NOVELL\OS2CLNT
To install the ODI driver for OS/2, follow the instructions below:
1 Boot the computer into OS/2. Enter OS/2 into full screen mode by double-clicking
2 If you are installing OS/2 Requester from the NetWare Requester Disk, go to the
Installing OS/2
To install from the NetWare Requester disk, follow the steps below:
Requester from
1 Insert the NetWare Requester diskette into the drive and run the INSTALL
NetWare Requester
Disk
2 Choose the
3 When the Select Options for CONFIG.SYS window appears, type the driver name
4 Select any other CONFIG.SYS options you wish to modify. When finished click on
26
PCNTNW.OS2
directory.
on the Command Prompts icon in the OS/2 System window and then double
clicking on the OS/2 Full Screen icon.
steps given under "Installing OS/2 Requester from NetWare Requester Disk" on
page 26.
If you are installing OS/2 Requester from the NetWare WSOS2_1 Disk, go to the
steps given under "Installing OS/2 Requester from NetWare WSOS2_1 Disk" on
page 27.
program. For example, if the diskette is in drive A, then type the following
commands:
A:\
INSTALL
Requester on Workstation
into the field labeled
PCNTNW.OS2
the button.
Save
English
is contained in the LAN Disk in the
under the Installation menu.
Network Interface Card driver
.