Setting Up The Network Connection - HP Vectra VL6 7 Administrator's Manual

1 Setting Up the Network Connection

Setting Up the Network Connection
Setting Up the Network Connection
This section describes the procedure to make a LAN Disk using either the Windows-
based HP Master Diskette Creation utility or MS-DOS.
To setup the network connection:
•
•
NOTE HP LAN drivers are supported on Vectra PCs only. This does not apply to drivers for
Microsoft Windows NT 4.0 and Microsoft Windows 95.
10
connect the LAN cable to the PC as described in the User's Guide supplied with
your PC.
check the configuration of the interface before installing the LAN drivers.
English