Odi Dos Client Driver - HP Vectra VL6 7 Administrator's Manual

ODI DOS Client Driver

The Novell ODI driver for DOS is used with many Novell products. It is also used by
DOS and Microsoft Windows 3.x computers to gain access to Novell servers through
one of the following:
NetWare DOS Requester (using Virtual Loadable Modules or VLMs) or
NetWare DOS Shell (using NETX.EXE)
Both NetWare clients use an ODI driver to enable them to use the HP Ethernet
Family Adapter to access the LAN medium. File service to all versions of NetWare
servers is possible from either the DOS Requester or DOS Shell clients. Access to
enhanced services provided by later versions of NetWare servers may require using
the DOS Requester. Other Novell products, like Personal NetWare and LAN
Workplace for DOS, also use the DOS ODI driver.
The DOS ODI driver is contained within the
Disk, the contents of this directory are:
To install the ODI driver with DOS Requester (VLM.EXE), refer to page 22 .
To install the ODI driver with DOS Shell (NETX.EXE), refer to page 23 .
For more information about Netware DOS Client, refer to the Netware Client for
DOS and MS Windows User's Guide and Netware Client for DOS and MS
Windows Technical Reference manuals provided with your Novell software.
For more information about the NET.CFG file, refer to the Novell NetWare manuals
and to
NOTE When the DOS ODI driver is used, it will locate the HP Ethernet Family Adapter and
read its settings automatically.
\NOVELL\DOSCLNT\PCNTNW.COM
\NOVELL\DOSCLNT\PCNTNW.INS
\NOVELL\DOSCLNT\NET.CFG
"NET.CFG Options for Novell NetWare" on page
2 Installing Novell NetWare Drivers
directory of your LAN
NOVELL\DOSCLNT
39.
ODI DOS Client Driver
English 21