Cleaning The Oven Cavity - Smeg SO6104S4PN Manual

9. Reinsert the intermediate glass unit and
reposition the inner glass.
The intermediate glass pane must be
repositioned on the open door so that
the screen printing in the corner can be
read from left to right (the rough part of
the screen printing must face the
external glass pane of the door).
10. Be sure to fit the 4 pins of the inner glass well
into their seats on the door.

Cleaning the oven cavity

In order to keep your oven in the best possible
condition, clean it regularly after letting it cool
down.
Avoid letting food residue dry inside the oven
cavity, as this could damage the enamel.
Take out all removable parts before cleaning.
For easier cleaning, it is recommended to
remove:
• the door;
112 - CLEANING AND MAINTENANCE
• The rack/tray support frames.
In the event you are using specific
cleaning products, we recommend
running the oven at maximum
temperature for 15-20 minutes in order
to eliminate any residue.
Drying
Cooking food generates moisture inside the
appliance. This is a normal phenomenon and
does not affect the appliance's operation in any
way.
Each time you finish cooking:
1. Let the appliance cool down.
2. Remove any dirt from inside the appliance.
3. Dry the interior of the appliance with a soft
cloth.
4. Leave the door open until the inside of the
appliance has dried completely.
Removing rack/tray support frames
Removing the rack/tray support frames enables
the sides to be cleaned more easily.
A = front housing
B = rear pin
In some models, the rear pin B
can be removed and re-
assembled in the same way as
the front housing A.
To remove the rack/tray support frames:
1. Unscrew the front fixing pin located on the
side wall near the opening of the oven
914779723/A