Smeg SO6104S4PN Manual page 42

Oven settings
Dedicated menu for additional product
functions.
• In the "settings menu
SETTINGS
Keep warm
This mode allows the appliance to keep
cooked food warm (at low
temperatures) after cooking finishes with
a cooking cycle for which a duration
has been set (if this is not manually
interrupted), without altering the taste
and smell obtained during cooking.
The keep warm function will be
activated 5 minutes after cooking has
finished; this is indicated by a series of
beeps (see cooking or function ended).
The temperature of the keep warm
function is set to 80°C.
1. Select Keep warm.
2. Select On.
3. Touch the CONFIRM
activate the Keep warm mode.
914779723/A
" touch the OVEN
button.
button to
Eco light
For greater energy savings, the lights
inside the oven cavity are automatically
deactivated approximately one minute
after the start of cooking or after the
door is opened.
To stop the appliance from
automatically deactivating the light after
approximately one minute, set this
mode to Off.
The manual on/off control is always
available. Press the
available, to manually activate the oven
light or the
The Eco light function is factory set to
On.
1. Select Eco light.
2. Select On.
3. Touch the CONFIRM
activate the Eco light mode.
Water hardness
This mode allows you to set the water
hardness value in order to optimise the
descaling process.
The appliance is factory set for water of
medium hardness (3).
1. Select Water hardness.
2. Scroll to the desired level (from 1 a 5).
3. Touch the CONFIRM
confirm.
If your mains water supply is too hard,
we recommend using a water softener.
Request information on the hardness of
your water from your local water board.
Depending on the water hardness value that
has been set, after the steam functions have
been used for a certain number of hours, the
display will prompt you to carry out the
descaling procedure.
According to the use of the appliance and the
symbol, when
symbol to deactivate it.
button to
button to
USE - 107