Smeg SO6104S4PN Manual page 37

2. Select
PLATE WARMING
3. Touch the START
Plate warming function.
Unless otherwise set, the Plate warming
function has a maximum duration of 12
hours and 59 minutes.
The following can be set while the function is in
operation:
• the temperature
• the duration of the function
• one programmed function
duration different from the default one is set).
When finished, a buzzer sounds briefly, which
can be deactivated by touching any point of the
display or by opening the door.
STEAM HEAT
The function steam-heats food that has
already been cooked and stored in the
fridge.
1. Place the food to be heated in a container.
2. Open the door.
3. Place the container on the rack in the
second shelf from the bottom.
4. Close the door.
5. Select
STEAM HEAT
6. Touch the COOKING DURATION
button or the relevant value.
7. Scroll through the values and select the
required cooking duration.
8. Touch the START
reservoir filling procedure.
The temperature of the steam heating
cannot be changed by the user.
9. Proceed with reservoir filling as described
above.
10. Touch the START
steam heat function.
End of steam heat
At the end, "Function ended" displays and a
buzzer sounds briefly, which can be
102 - USE
.
button to start the
(from 40°C to 80°C);
;
(only if a
.
button to start the
button to start the
deactivated by touching any point of the display
or by opening the door.
11. Touch the HOME
function.
12. Proceed with draining the reservoir as
described above.
KEEP WARM
This function allows you to keep pre-
cooked foods warm.
1. Select
KEEP WARM
2. Touch the TEMPERATURE
relevant value.
3. Scroll through the values and select the
required cooking temperature (from 60°C
to 100°C).
4. Touch the START
Keep warm function.
When finished, a buzzer sounds briefly, which
can be deactivated by touching any point of the
display or by opening the door.
STONE
Useful for on stone cooking. For use
with the PPR2 or STONE accessory
sold separately.
Please refer to the instructions and
recommendations for use described in
the accessory documentation.
1. Open the door.
2. Insert the PPR2 or STONE accessory in the
oven cavity (refer to the specific manual of
the accessory).
3. Close the door.
4. Select STONE
5. Scroll through the values and select the
required cooking temperature (from 50°C
to 250°C).
button to quit the
.
button or the
button to start the
.
914779723/A