Smeg SO6104S4PN Manual page 44

Display brightness
This allows the display brightness level
to be selected.
The Display brightness function is
factory set to High.
1. Select Display brightness.
2. Select from the options High - Medium -
Low.
3. Touch the CONFIRM
the selection.
Weight type
Allows you to set the unit of
measurement to display the weight
value in kilograms (kg) or in ounces
(oz).
The Weight type function is factory set
to kg.
1. Select Weight type
2. Select kg or oz.
3. Touch the CONFIRM
activate the desired weight unit.
Connection setting (SmegConnect models
only)
Menu where connectivity parameters
are displayed.
• In the "settings menu
CONNECTION SETTINGS
the left in the lower area
For CONNECTION settings
please refer to the "Built-in Oven
Connectivity" manual.
System info
Menu displaying information about
serial number and software versions.
• In the "settings menu
SYSTEM INFO
914779723/A
button to confirm
.
button to
" touch the
button (at
).
" touch the
button (at the right in
the lower area
Showrooms
Menu dedicated to showrooms.
• Touch the SHOWROOMS
the "settings menu
lower area ).
Show Room (for showrooms only)
This mode deactivates all the
appliance's heating elements, while
keeping the control panel active.
During normal operation, it is indicated
by the indicator light turning on in
the information area
To use the appliance normally, set this
mode to Off.
1. Select Show Room.
2. Select On.
Touch the CONFIRM
3.
activate the Show Room mode
Demo Mode (for showrooms only)
The same as Show Room, when this
mode is activated, after a certain period
of inactivity, a demonstration of the
various screens that illustrate the
potential of the appliance is shown on
the display.
To use the appliance normally, set this
mode to Off.
1. Select Demo Mode.
2. Select On.
3. Touch the CONFIRM
activate the demo mode.
).
button on
" (at the centre of the
.
button to
.
button to
USE - 109